Risk Assessment
K.K. Kiran; Jagadish G Kori
Abstract
Blast load is an impulse, unpredictable load occurs on the structure. It causes not only damage to the structure but also takes the life of the people. Here an attempt is studied is carried out for a high-rise structure exposed to blast load. The response is calculated by using Adaptative based modal ...
Read More
Blast load is an impulse, unpredictable load occurs on the structure. It causes not only damage to the structure but also takes the life of the people. Here an attempt is studied is carried out for a high-rise structure exposed to blast load. The response is calculated by using Adaptative based modal push over analysis. The responses are storey drift, displacement, velocity, accelerations, pressure, impulse, base shear, interstorey displacement, storey drift ratio and normalized pressure impulse. The three-dimensional analysis is carried out. The response is controlled by using M R damper and cladding material. The different algorithm is used for the analysis of MR damper are Bang Bang, Clipped Optimal, Lyapunov and LQR control algorithm.
Structural Simulation
K.K. Kiran; Jagadish Kori
Abstract
Designer of military and high-security facilities, planner, architects and engineers throughout the world are much concerned against a blast load on structures. Blast load is a human hazard occurring in the world, due to terrorist, chemical explosives, mining area, an accident, and so on. Blast load ...
Read More
Designer of military and high-security facilities, planner, architects and engineers throughout the world are much concerned against a blast load on structures. Blast load is a human hazard occurring in the world, due to terrorist, chemical explosives, mining area, an accident, and so on. Blast load is an unpredictable load occurring. The blast load occurs in a few seconds. The blast load does not only lead to structural but also take the life of occupations. In this study five – storey unsymmetrical structures exposed to blast load are considered. The three different control devices are considered such as cladding material, base isolation with lead rubber bearing (LRB) and MR Damper. Cladding material will absorb energy after the severe pressure release from the blast and then transfer less amount of energy to the structures. Base isolations with lead rubber bearing not only absorb energy but also increase the stiffness of the structure. Among the different devices’ MR Damper plays a vital role reduce the considerable amount of responses.